Engineers ask how many types of fuses there are because the answer decides everything downstream: the interrupting rating you write on a datasheet, the speed class you specify, and the fuse tube you end up buying. There is no single number. In practice fuses are grouped along five axes, and […]
Continue reading
For cutout fuse construction, two tube designs are common: the moisture-proof fuse tube and the horn fiber fuse tube. Each suits a different current class and environment, and choosing the right one reduces liner expansion that can cause interruption problems. Two Tube Types, Two Duties Moisture-proof fuse tube: standard on […]
Continue reading
Covering a vulcanized fiber tube with a fiberglass and epoxy canvas layer combines the arc-quenching behavior of the fiber core with the strength and water resistance of the outer composite. This article explains the properties that make the combination useful and where it fits. Why Combine a Fiber Core With […]
Continue reading
Hard fiber tubes are used in both fuse and motor applications, but “hard fiber” covers several materials. Understanding the four common types, and what each is good for, helps you specify the right tube and avoid a mismatch that shows up as a failed fuse or a short-lived motor part. […]
Continue reading
G5 and G9 melamine tubes are produced by lamination molding and tube rolling. Understanding the process explains why melamine tube behaves the way it does, why inner diameter affects the maximum producible length, and which of the two methods suits your part. This page covers both production routes and the […]
Continue reading
Fuse tube production splits into three voltage classes: high-voltage, medium-voltage, and low-voltage fuse tubes. All of them must have arc-extinguishing characteristics. This article walks through how a vulcanized fiber fuse tube and a melamine tube are made, so you understand what you are buying. The Three Voltage Classes and What […]
Continue reading
Configuring a fuse link tube means matching the fuse to the protection duty, then coordinating it with the other devices in the distribution system. Get this right and the fuse isolates only the faulted section; get it wrong and you get nuisance trips or an uncleared fault. This guide sets […]
Continue reading
These product datasheets cover every fuse tube and insulation tube grade we manufacture. Each PDF follows the same layout, so a grade can be checked against a drawing without reading a full catalogue: construction, stock size range, colors, machining options and packing are all on one or two pages. Nine […]
Continue reading